If you have any questions at all, feel free to give us a call at the number provided or fill out the form below. Thank you again and we look forward to being of service to you.

“We are extremely satisfied with the etch like logos that you have installed on the exterior doors and windows of the hotel. These areas are subject to strong Florida sun and frequent cleaning, and still remain in a “like-new” condition after many years since application. Your process not only enhances plain glass surfaces, but also alerts our guests of glass areas around hotel exits. I have enjoyed our working relationship and look forward to working with you in the future.”

John A. Poe, General Manager / Embassy Suites Hotel, Tampa Airport

“We are still receiving compliments on our glass front door which has our logo in your Etchlike product. It has been almost six years and it still looks great. It is always interesting to see our customer’s faces when we tell them it was not etched. We highly recommend your product to everyone that inquires. Just wanted to take the time to share these compliments with you.

Mark and Edith Rust, Crown Printing, Inc.

“Just thought I’d drop a line to let you know how well your faux etch designs have held up, on our sliding glass doors. I don’t know if you remember, but weekdays I care for small children in my home. Needless to say, the sliding doors to the patio are the most used doors in the house. My husband commented just the other day, ‘The way you have to wash those doors, almost daily, you would think the design would have worn off by now.’ It’s been over four years, and they look as good as the day you put them on. By the way, I will getting some large mirrors soon, and I’ll want to get something done on them. I’ll give you a call when they are installed. Thanks for your fine work.”

Antoinette Panzica

“We have completed our evaluation of two samples of Etchlike product applied to our glass. Our testing involved subjecting the samples to a saltwater spray within a closed container. The saltwater was at a 5% concentration of salt which is typical for this type of testing. Your samples pass the 500-hour mark for this testing. That means that the paint itself stayed on the glass and suffered no under film corrosion during that period of time. I consider this to be a successful evaluation for our purposes. The automotive industry is pleased to get 500 hours of accelerated salt spray exposure without corrosion. For marine purposes, I believe this is good performance for a decorative product. We therefore plan to pursue the use of the Etchlike product for decorative purposes on glass in the marine industry.”

Patrick J. VanderVeen, Director of Development / Nelson A. Taylor Co., Inc.

(click to enlarge)

Etch Tech Simulated Glass Etching uses the Etchlike® Catalytic Polymer process. The catalytic polymer is applied with a special roller over a custom designed template. It has the look and feel of etched glass. Etch Tech is NOT a sticker or decal. It does not crack, peel, bubble or fade.

How can it be permanent and removable?

Like the paint on your automobile, it is permanent. However, if you wanted to remove the paint from your automobile, down to bare metal, you could. An Etch Tech design is permanent for as long as you want to keep it. It can be removed at any time, leaving the glass surface in its original condition.

What designs are available?

Etch Tech uses Computer Aided Design (CAD) tools to create your custom template. Any graphic that can be input to, or created on a computer can be used to create your template. We will show you thousands of designs, all of which can be altered as necessary to your needs. If you have a favorite design, fabric or wallpaper, we can usually work with it.

How long does the installation take?

Etch Tech does all installations on-site, without removing any installed glass. This makes ‘down time’ a non-issue. The actual installation takes from one to six hours, depending on quantity and complexity. The work is performed without the slightest fear of damage to surrounding floors, walls or furniture. There will be a slight ‘fingernail polish remover’ smell during the installation. This smell is not harmful to you, your children or your pets. The smell dissipates quickly, usually in 15 to 20 minutes after installation is complete. Your EtchTech design will be dry to the touch in about one hour, and completely cured in three days.

How is an EtchTech design cleaned?

Any non-abrasive commercial glass cleaner and paper towels will keep your design clean, without any fear of fading.

Etchlike® is perfect for today’s glass decorative needs—it’s practical, elegant, and an affordable alternative to invasive etching.

Commercial signage, graphics and logos are created from your specifications, or from the extensive Etch Tech catalog.

Etch Tech designs are permanent until removal is desired. This makes Etch Tech ideal for leased glass and where the applied design may need to be changed.

Because the EtchTech process is non-invasive to the glass, EtchTech does not weaken the glass, thus eliminating any concerns over code violations or voiding of manufacturers warranty on tempered glass.

Are You Looking For Something Special For Your Business? Contact Us Today! 303-358-1157

Welcome to EtchTech Inc.
Where We Offer Elegant Etched Glass
In The Greater Denver, CO Metro Area

For the Elegant Look and Feel of Etched Glass,
EtchTech uses the Etchlike® Simulated Glass Etching process.

Servicing The Greater Denver Metro Area